Need advice on the best amplifier and/or receiver to buy.
There are 12 speakers in the house: 2 on entrance to house, 2 in the middle of a large room, 2 at end of a large room, 2 in the dining room, 2 in the kitchen and 2 outside for a total of 12 speakers. Each speaker is a proficient C610 http/www.amazon.com/Proficient-C610-Polypropylene-Discontinued-Manufacturer/dp/B000P0ZW3A, which states it is 8ohm 5w-65w.
Each speaker has wire that comes to the tv room ie there not setup in parallel. However, nearby the speakers there is a on the wall connector that controls the volume for 2 speakers a VCS60 (ie the 2 entrance speakers are connected to one volume controller)
http/www.proficientaudio.com/products/accessories/volume-controls
All we need the sound system to do is play one sound ie not different sounds in different rooms. It is basically for background/dance music for house parties.
This was all previously connected to receiver that had a A and B output for 8 speakers which of course had connected all 12. Predictably this would trip out often and never really worked well. It has now burnt out.
I need a receiver or amplifier that can handle all those speakers, that can receive input from 2 sources (one from a cd player and one from iphone or something else connected to a rca wire).
Any ideas on what would handle this setup.
Thanks,
There are 12 speakers in the house: 2 on entrance to house, 2 in the middle of a large room, 2 at end of a large room, 2 in the dining room, 2 in the kitchen and 2 outside for a total of 12 speakers. Each speaker is a proficient C610 http/www.amazon.com/Proficient-C610-Polypropylene-Discontinued-Manufacturer/dp/B000P0ZW3A, which states it is 8ohm 5w-65w.
Each speaker has wire that comes to the tv room ie there not setup in parallel. However, nearby the speakers there is a on the wall connector that controls the volume for 2 speakers a VCS60 (ie the 2 entrance speakers are connected to one volume controller)
http/www.proficientaudio.com/products/accessories/volume-controls
All we need the sound system to do is play one sound ie not different sounds in different rooms. It is basically for background/dance music for house parties.
This was all previously connected to receiver that had a A and B output for 8 speakers which of course had connected all 12. Predictably this would trip out often and never really worked well. It has now burnt out.
I need a receiver or amplifier that can handle all those speakers, that can receive input from 2 sources (one from a cd player and one from iphone or something else connected to a rca wire).
Any ideas on what would handle this setup.
Thanks,