So I've had a problem many times where the firmware of my Sound Blaster Recon3D Omega Wireless would go corrupt on startup, and via a workaround I would be able to fix the issue by forcing it to reinstall its firmware (http
/www.tomsguide.com/answers/id-1723323/sound-blaster-recon3d-power.html).
Today the same issue appeared again and I fixed it using the standard procedure. However, after doing this the microphone on my headset wouldnt unmute anymore. The button is not broken, since pressing it for 3 seconds activates the searching for connection protocol, but just pressign it to umute the mic doesn't work.
Anyone have an idea to fix this?
Thanks in Advance,
Dustin
/www.tomsguide.com/answers/id-1723323/sound-blaster-recon3d-power.html). Today the same issue appeared again and I fixed it using the standard procedure. However, after doing this the microphone on my headset wouldnt unmute anymore. The button is not broken, since pressing it for 3 seconds activates the searching for connection protocol, but just pressign it to umute the mic doesn't work.
Anyone have an idea to fix this?
Thanks in Advance,
Dustin
Facebook
Twitter