Question TV signal lost after splitter connect

Dec 15, 2020
2
1
15
0
Cannot figure my coax cabling problem. I just installed a second tv in my bedroom and when I connect my coax to the splitter to go to the new tv my #1 tv goes blank and says no signal. I've tried different splitters same problem. I've got an amp installed before the splitter I've tried it before and after the splitter. Tv #1 works great until I hook up the coax going to tv #2. That's when it goes to no signal and goes blank. It's driving me nuts trying to resolve this issue. I know it's got to be something simple I'm overlooking.
 
Dec 15, 2020
2
1
15
0
Problem solved. There was a problem with the new coax from the splitter to the new TV. Tempted a new coax from splitter to the new tv and problem was solved.
 
Reactions: helpstar
Thread starter Similar threads Forum Replies Date
B TVs 0
54Yvonne TVs 1
S TVs 3
R TVs 1
K TVs 0
M TVs 1
R TVs 0
Damian_wilding TVs 4
G TVs 1
FiveAlarmFrancis TVs 2
K TVs 9
A TVs 1
Tonychip TVs 3
M TVs 3
C TVs 0
I TVs 2
ranolia TVs 0
D TVs 0
lund416 TVs 2
Gators2b TVs 3

ASK THE COMMUNITY