What do I do before disassembling a laptop?

[Mahmoud Khairt]

I want to disassemble a laptop. What dangers should I be aware of? How can I be most careful?

Thank you!

 

[Harrison Whitmarsh]

Hello Mahmoud Khairt, and welcome to Toms!

Your question cannot be answered quickly, so I am going to refer you to a guide that I found very helpful last time I was asked this:
http/www.laptop-repair.info/take_laptop_apart.html
That guide should have all of the information you need!

Enjoy, and good luck my friend!

- Harrison Whitmarsh
Lincoln Nebraska USA

 

[reedo_43]

Simple. Take good photos as you progress and label All of screws where they came from. It may seem tedious but it will make getting it back together much easier. Good luck!

 

[faalin]

Before disassemble, take the battery out and hold the power button down for 10 seconds. I normally press the power button a few times just to make sure all the power has been drained from the system.

 

[boosted1g]

Remove battery, separate bins for screws, good documentation/photos of what you took apart from where.
If you can find one then get a disassembly manual for your laptop.

You will for sure need a set of precession screwdrivers (at minimum both sizes of Philips, and the smallest flat head. A pair of tweezers and a plastic spudger is also advised. You will need to take care when removing and reinserting the ribbon cables so that you do not break the plastic clip that holds it in place.

 

[McHenryB]

Why do you want to disassemble your laptop? And are you prepared for the eventuality that you might damage it beyond hope of repair?

 

[Harrison Whitmarsh]

Why do you want to disassemble your laptop? And are you prepared for the eventuality that you might damage it beyond hope of repair?

This! ^

 

[rgd1101]

backup your data just in case it won't boot up anymore.