what sub-woofer should i get with my receiver

[mrtippmann]

this is the receiver i have http/www.newegg.com/Product/Product.aspx?Item=N82E16886983016
im not sure what kind of sub i should get

 

[faalin]

I run this http/www.newegg.com/Product/Product.aspx?Item=N82E16882780103&cm_re=klipsch_subwoofer-_-82-780-103-_-Product of my yamaha receiver. Its in a 20x20 room and keep the bass knob at about 1/4 turn from off, just enough to keep the pictures from shaking on the wall

 

[mrtippmann]

i have a room probably half that so i dont think i need one that powerful. i also dont want to spend that much on it

 

[DelroyMonjo]

You will need a powered subwoofer for that. These have their own separate amplifier and usually a standard wall plug with a single RCA line input.

 

[faalin]

This is about the cheapest i would go to get a good bass sound and wont die on you in a few months http/www.amazon.com/JBL-150-Watt-Powered-Subwoofer-Black/dp/B00DUHW6UW

 

[mrmotion]

Depending on your price range, this one has worked amazingly for me.

http/www.newegg.com/Product/Product.aspx?Item=N82E16882780103

EDIT: realized I picked the same sub faalin did. Piece of advice, don't buy a cheap powered sub. If your not ready to commit some dough then wait.

 

[mrtippmann]

the sub both of you guys said I should get is going to be a shellsocker today so I guess I'm getting that one thanks for the help

 

[mrtippmann]

I run this http/www.newegg.com/Product/Product.aspx?Item=N82E16882780103&cm_re=klipsch_subwoofer-_-82-780-103-_-Product of my yamaha receiver. Its in a 20x20 room and keep the bass knob at about 1/4 turn from off, just enough to keep the pictures from shaking on the wall

i just got http/www.newegg.com/Product/Product.aspx?Item=N82E16882780103 sub in the mail and im not sure how to hook it up it didnt come with any cables and my receiver only seems to have one plug for a sub

 

[DelroyMonjo]

Just by looking at the picture of the Klipsch SW, apparently you hook it up using standard left and right speaker out (zip wire or Monster cable, whateva) from the rcvr or use the L&R line out jacks from rcvr to SW and can hook up speakers from the sw or the receiver.

 

[mrtippmann]

Just by looking at the picture of the Klipsch SW, apparently you hook it up using standard left and right speaker out (zip wire or Monster cable, whateva) from the rcvr or use the L&R line out jacks from rcvr to SW and can hook up speakers from the sw or the receiver.

my receiver only has a preout for the sub what do i use to hook my sub up to it

 

[faalin]

Take the single subwoofer output from the receiver and buy a rca splitter and plug it into the red and white rca's on the back of the sub.

 

[mrtippmann]

Take the single subwoofer output from the receiver and buy a rca splitter and plug it into the red and white rca's on the back of the sub.

what plug do i need for the reciver?

 

[faalin]

Buy one of these http/www.amazon.com/Monoprice-Digital-Coaxial-Splitter-Adapter/dp/B003L1AGVS?ie=UTF8&keywords=rca%20splitter&qid=1464136073&ref_=sr_1_9&sr=8-9

And one of these http/www.amazon.com/Mediabridge-ULTRA-Subwoofer-Cable-Feet/dp/B003FVYXY0?ie=UTF8&keywords=mono%20rca%20cable&qid=1464136164&ref_=sr_1_1&sr=8-1

That is all you need to hook up the subwoofer

 

[mrtippmann]

ok thank you