when updates install to my loptop asus win10. it becomes black screen and can not open my loptop. i did a lot of trouble shoot

cezar100856

Prominent
Sep 23, 2017
2
0
510
0
Asus Lop top (N56V)
Window 10 / 64

Auto updates where been installed to my loptop.
It restart to long. and after restart it becomes black screen.
Can you please help me.
Thank you
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Thread starter Similar threads Forum Replies Date
N Laptop Tech Support 2
P Laptop Tech Support 5
K Laptop Tech Support 2
T Laptop Tech Support 13
A Laptop Tech Support 3
M Laptop Tech Support 1
M Laptop Tech Support 1
K Laptop Tech Support 1
S Laptop Tech Support 28
R Laptop Tech Support 1
K Laptop Tech Support 3
Danthebugg Laptop Tech Support 12
R Laptop Tech Support 6
B Laptop Tech Support 13
S Laptop Tech Support 1
D Laptop Tech Support 5
R Laptop Tech Support 1
N Laptop Tech Support 1
G Laptop Tech Support 1
jagsta21 Laptop Tech Support 2
Similar threads
Question My Windows 8.1 PC shut down while installing updates because of an error. Now I can't go past the booting up screen because of a fatal error that appe
Question Which updated graphics driver should I install from intel's website?
Update installation malfunction
Solved! Windows installation problems
Recently I have installed updated graphics driver Amd Radeon HD 7670M to the latest version, and popping up the Blue screen of
My dell inspirion 15 5000 series died while installing updates and is now stuck in a loop going from the logo to black loading
My laptop is showing please don't power off r unplug your machine. Installing update for about four hours now
My laptop is in a endless updating loop. It will try to install updates and then cant comolete the updates and will uninstall.
BIOS broken after update
how do I create a windows installation disk to repair my computer
I have uninstalled my nivdia driver accidentally and updated windows 10 now how can I get my driver installed and I don't know
Laptop beeping after BIOS update
Windows 10 Blue Screens After Install - Updates Freeze - Programs don't install - now same happens for Windows 7
Windows 7 Will Not Update on a Clean Install on an Acer Aspire One 722
Adobe flash player is installed but apparently need a updated on My IMAC
Can I safely install AMD updates to my laptop?
Windows Anniversary update (from the stand alone installer) blue screens at approximately 75% of final installation portion
Asus N550JK problems after driver installs/windows 10 updates
Dell vostro: Increase brightness after installing an update
asus live update tool

ASK THE COMMUNITY