Yuntab tablet wont go passed yuntab screen

Was it updating before this or did something else happen? Try going into "Safe Mode" and see if it will load.

To get into "Safe Mode" please do the following.

1. First turn off the tablet.

2. Next press and hold "Power" until you see the manufacturers logo on the screen, then release the power button.

3. "Quickly" press "Volume Down" and hold it for few seconds until you see the message "Safe mode: ON" or something similar.

4. If you wanted disable it, simply repeat the steps above, and you should see "Safe Mode: OFF" rather than on.
 
Was it updating before this or did something else happen? Try going into "Safe Mode" and see if it will load.

To get into "Safe Mode" please do the following.

1. First turn off the tablet.

2. Next press and hold "Power" until you see the manufacturers logo on the screen, then release the power button.

3. "Quickly" press "Volume Down" and hold it for few seconds until you see the message "Safe mode: ON" or something similar.

4. If you wanted disable it, simply repeat the steps above, and you should see "Safe Mode: OFF" rather than on.
 
Thread starter Similar threads Forum Replies Date
pointlesszebra Android Tablets 0
F Android Tablets 1
P Android Tablets 9
F Android Tablets 1
pikamasterdom07 Android Tablets 1
I Android Tablets 2
C Android Tablets 1
A Android Tablets 4
D Android Tablets 1
E Android Tablets 0
Shenelby Android Tablets 1
N Android Tablets 0
P Android Tablets 0
Kavina Android Tablets 5
Thoroughly confused Android Tablets 0
K Android Tablets 1
H Android Tablets 6
C Android Tablets 2
F Android Tablets 1
B Android Tablets 1

ASK THE COMMUNITY

TRENDING THREADS