Acer v5 571

[chatph58]

Hi all, I have been trying to load a small unziped program onto an 8gb SD card, a message comes up saying card is full, yet it is a brand new one, I tried a 2 gb and a 4gb, all got the same answer the mssage also states that the program needs 183 kb more space, ....confused

 

[BoNkeRz808]

Sounds like you are trying this on a windows machine, as the same thing happened to me to me. If so, try running a bad sector check and formatting the sd card.

 

[chatph58]

Sounds like you are trying this on a windows machine, as the same thing happened to me to me. If so, try running a bad sector check and formatting the sd card.

 

[chatph58]

Thanks for the quick reply, but the card has to be fitted into a R/C tx for updating, the card needed to be formatted on the Tx first then applied to the computer, the Tx is A very well know make and the update is world wide..... any help
Barry

 

[BoNkeRz808]

Thanks for the quick reply, but the card has to be fitted into a R/C tx for updating, the card needed to be formatted on the Tx first then applied to the computer, the Tx is A very well know make and the update is world wide..... any help
Barry

I'm sorry, I was under the assumption that the sd card was going into an android device after the transfer...I really dont know what device is a tx...palm?

 

[chatph58]

Thanks for the quick reply, but the card has to be fitted into a R/C tx for updating, the card needed to be formatted on the Tx first then applied to the computer, the Tx is A very well know make and the update is world wide..... any help
Barry

I'm sorry, I was under the assumption that the sd card was going into an android device after the transfer...I really dont know what device is a tx...palm?

 

[chatph58]

Sorry, TX is short for transmitter, used for the control of model aircraft, cars etc, the make is a Futaba
Barry

 

[BoNkeRz808]

Sorry, TX is short for transmitter, used for the control of model aircraft, cars etc, the make is a Futaba
Barry

maybe this might help?
http/rc.runryder.com/helicopter/t767406p1/

 

[chatph58]

Sorry, TX is short for transmitter, used for the control of model aircraft, cars etc, the make is a Futaba
Barry

maybe this might help?
http/rc.runryder.com/helicopter/t767406p1/

 

[chatph58]

Yes it does help, but being technically challanged, I still can not upgrade my TX, I'll forget about it and take it to a dealer, to play with.
Thanks for your input
Barry