Anyone know a good audio splitter (1F and 2M)

[BrawlX]

I want to connect 2 devices to a pair of speakers:
A monitor with a headphone port / Game console (Haven't decided on this one yet)
A PC
Before anyone asks, my PC doesn't connect to my monitor it goes to speakers
I'm thinking a audio splitter that pushes 2 male ends to a female end (2M to 1F or something like that) would do since my speakers have a male end and the devices I want to connect to it use female ends. Anyone have suggestions?
Thanks

 

[Alabalcho]

What you need is called "Stereo Audio Mixer". Check your favorite store, you can buy one for like $40.

Depending on the speakers you use, you can also build one yourself with couple of jacks and resistors, but you will need basic electronic skills for that.

 

[TemplarBlood]

you can grab splitter box ( https://www.amazon.com/Sescom-SES-IPOD-AB-Stereo-MP3-Player/dp/B005TE7GP4/ref=sr_1_15?ie=UTF8&qid=1488176238&sr=8-15&keywords=audio+switch ) link is an example , possibly a purchase? lol , or you can literally make one with a dpdt switch , 3 3.5mm jacks , and some small gauge speaker wire from walmart, i built said box and did exactly as you request ,hope this helps

 

[americanaudiophile]

You can't use a splitter. A mixer would be required if you wanted to hear both sources at the same time on the speakers and adjust the relative levels of each source. You need an input selector.
You can buy
http://electronicsusa.com/mk1and2.html
or build one
http://www.instructables.com/id/Dual-Input-Audio-Switching-Circuit/