blu ray video issues

Roger38

Commendable
Feb 2, 2017
3
0
1,510
0
Connected a new blu ray player to my receiver with a 3' high speed hdmi cable. Connected the output from Onkyo receiver to Sony 4K tv with a 25' high speed hdmi cable. In just a couple of minutes video starts to flash then freezes but the audio continues. If I unplug from receiver and plug directly to blu ray player, lose sound system, video is fine. Onkyo support says I should use a shorter hdmi run to the tv. Very hard for me to do since tv is 20' away. Is there something else causing the problem? Or something else to consider?
 
Is the Onkyo compatible with a 4k signal?
A different long HDMI cable might work. HDMI is dependent on how the receiver - cable - TV all meet the HDMI standard. How high is high speed? A cable for 4k should have a data rate of 18gbs. Many are 10gbs.
http://www.ebay.com/itm/like/322264616379?lpid=82&chn=ps&ul_noapp=true
http://www.tributariescable.com/
Some are active cableshttps://www.monoprice.com/Product?p_id=12735&gclid=CKnd_MO_9NECFcSEswodN3gGOg

 

Roger38

Commendable
Feb 2, 2017
3
0
1,510
0


 
Thread starter Similar threads Forum Replies Date
A Streaming Video & TVs 1
P Streaming Video & TVs 4
E Streaming Video & TVs 2
G Streaming Video & TVs 11
C Streaming Video & TVs 2
E Streaming Video & TVs 14
S Streaming Video & TVs 2
F Streaming Video & TVs 1
L Streaming Video & TVs 1
A Streaming Video & TVs 0
G Streaming Video & TVs 3
bignastyid Streaming Video & TVs 2
J Streaming Video & TVs 1
J Streaming Video & TVs 1
G Streaming Video & TVs 1
G Streaming Video & TVs 14
G Streaming Video & TVs 5
G Streaming Video & TVs 5
H Streaming Video & TVs 1
G Streaming Video & TVs 1

ASK THE COMMUNITY