Can’t connect my bush tablet to internet step by step guide what Ito do plz

1. Try and restart the tablet. Sometimes it is that simple.

2. Update the firmware and any apps that need updating on the tablet.

3. If the problem persists, check your time and date on the tablet to make sure it is correct.

4. Should none of the former work...
a. Clear out the WiFi data on the tablet.
b. Reboot the modem/router.
c. Once the modem/router is fully 'up' again, reboot the tablet and re-input the WiFi data.

5. Check your internet connection. It may be what is going in and out rather than the tablet.

6. Make sure you have "Data" turned off on the device when using "WiFi" (that is if you have a plan with data through your tablet). If youdn't make sure it is turned off, the device can keep trying to switch to "Data" when you try and use "WiFi".

7. Now, if you are still having the problem at this point, and you are sure it isn't the modem/router that is the problem. Then you may wish to try a "Hard Reset" of the device. However, I really suggest saving this as a last option (or last before parts repair/replacement).

NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

3. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

4. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

5. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

6. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

7. Then press the "Power" button to hard reset the tablet.
 
1. Try and restart the tablet. Sometimes it is that simple.

2. Update the firmware and any apps that need updating on the tablet.

3. If the problem persists, check your time and date on the tablet to make sure it is correct.

4. Should none of the former work...
a. Clear out the WiFi data on the tablet.
b. Reboot the modem/router.
c. Once the modem/router is fully 'up' again, reboot the tablet and re-input the WiFi data.

5. Check your internet connection. It may be what is going in and out rather than the tablet.

6. Make sure you have "Data" turned off on the device when using "WiFi" (that is if you have a plan with data through your tablet). If youdn't make sure it is turned off, the device can keep trying to switch to "Data" when you try and use "WiFi".

7. Now, if you are still having the problem at this point, and you are sure it isn't the modem/router that is the problem. Then you may wish to try a "Hard Reset" of the device. However, I really suggest saving this as a last option (or last before parts repair/replacement).

NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

3. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

4. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

5. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

6. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

7. Then press the "Power" button to hard reset the tablet.
 
Thread starter Similar threads Forum Replies Date
K Android Tablets 3
KayleeBrooke98 Android Tablets 3
L Android Tablets 1
Needhelpasap98258 Android Tablets 1
Michael_c1993 Android Tablets 1
C Android Tablets 5
J Android Tablets 5
R Android Tablets 3
Xaibior Android Tablets 1
D Android Tablets 2
H Android Tablets 1
J Android Tablets 3
W Android Tablets 7
W Android Tablets 2
K Android Tablets 3
M Android Tablets 1
S Android Tablets 1
L Android Tablets 3
C Android Tablets 2
R Android Tablets 1
Similar threads
Question Why does my tablet keep turning off when it connects to the internet?
Question TG-TEK Tablet connects to Wifi, but still says no connection
Question Why is my Samsung Tablet not connecting to the internet? But it has Wifi.
Question How can I get my tablet to connect to internet?
Question Won't connect to Wifi
Info Galaxy Tab A (SM-T290) WIFI "couldn't authenticate connection"
Question Nook Color can't get past network connectivity
Question Cannot connect to Calibre on my laptop via WiFi from Calibre Companion - help needed
Question Ds4 isnt connecting to ps4 after using it in my android tablet
Question I need an Android tablet, preferably 7" class with 2 simultaneous USB connections
For Christmas I bought an android tablet lost the receipt can’t get the code how do I get the code
I factory reset my old galaxy tab e and I forgot the email so I can’t get in my tablet
Can’t reset Samsung tablet E so what can I do
I hardreset pendo 10 to factory settings wiped all data and now I can’t start it only says pendo then turns off
Intel nextbook can’t get to reset
Stuck in the Startup and can’t do a system recovery or factory reset
Can’t connect to WIFI
It’s not getting info on the tablet I can’t find the phone number to Lenovo tablets that directs me to the company that ca
My daughter set a passcode on her Yuntab tablet, and can’t remember the pattern. I’ve tired the methods I found online for
I have a AT&T tablet it’s an android, and I do have hotspot on my plan, but for some reason I can’t seem to get it working

ASK THE COMMUNITY