Help Installing Speakers and amplifier?

[Sean P]

Hi, I just recently got two JBL 8 ohm speakers. They take normal speaker wire, no rca connector. I am planning on making them work for essentially anything, whether for guitar, TV, computer, or 3.5mm (3.5mm isn't that much of a worry, I have a 1/4 to 3.5mm adapter). I am guessing that this is done through hooking the speakers up to a central amplifier, and then have the input of the amplifier go to a splitter that has 1/4 connectors, spdif connectors, RCA connectors, etc. Can someone please tell me if this is a correct way to do it/cheap amplifiers and splitters to do so, or if there is a cheaper or more efficient alternative way to do this?

 

[psoohoo]

not sure if you are in the US but you can try something like this
https/www.amazon.com/Lepy-LP-2020A-Hi-Fi-Stereo-Amplifier/dp/B00C2P61FO/ref=dp_ob_title_ce

 

[getochkn]

You would want to look for an amp that has multiple inputs for al lthe connectors you want.

 

[psoohoo]

not sure if you are in the US but you can try something like this
https/www.amazon.com/Lepy-LP-2020A-Hi-Fi-Stereo-Amplifier/dp/B00C2P61FO/ref=dp_ob_title_ce

 

[Sean P]

not sure if you are in the US but you can try something like this
https/www.amazon.com/Lepy-LP-2020A-Hi-Fi-Stereo-Amplifier/dp/B00C2P61FO/ref=dp_ob_title_ce

thank you very much, that looks great! I will look into other mini amplifiers similar to that and will begin to put these speakers to good use