Solved! I have a non smart non blutooth led tv how can i use bluetooth connectivity with bluetooth headphones?and would it b stereo?

[jain.pwn]

Hi i have a led tv non blue tooth . Iwant to connect my blue tooth headphone . I tried by connecting a bluetooth donggle bt no result. How can i doit. And if any solution , will i get the stereo quality ? Plz suggest.should i buy a blutooth transmitter with headphone,or it might b ok with my old headphone

 

[kanewolf]

Does your TV have a headphone jack or other audio outputs? If so, then you could use a bluetooth transmitter.

 

[americanaudiophile]

Did you turn the audio output of the TV on?
Did you try changing the audio output type to PCM stereo?
Did you try turning off the TV speakers?
Check the TV manual on how to configure the audio output you used.
Yes, you will get stereo.

 

[jain.pwn]

thanks for your precious suggestions . yes i have an audio output . now i will buy a bluetooth transmitter and headphone / but i dont know what PCM IS ?anyway i will enjoy i think . thanks for your support

 

[kanewolf]

thanks for your precious suggestions . yes i have an audio output . now i will buy a bluetooth transmitter and headphone / but i dont know what PCM IS ?anyway i will enjoy i think . thanks for your support

What @americanaudiophile was trying to determine is if you hooked a BT transmitter to a digital audio output, did you change it from surround to stereo. But I read your original post as you tried a USB blutooth adapter, since you used the term "dongle". If that IS what you tried at first, it failed because the TV doesn't know how to interact with it. It knows how to read files from a USB flash drive (maybe for firmware updates only).
Using analog output from the TV, like a headphone jack (which will turn off the speakers) doesn't require any settings changes in the TV menus. Something similar to this is what I was recommending -- https/www.amazon.com/TaoTronics-Bluetooth-Transmitter-Receiver-Simultaneously/dp/B01EHSX28M/ref=pd_lpo_vtph_107_bs_t_1

 

[jain.pwn]

thanks for your precious suggestions . yes i have an audio output . now i will buy a bluetooth transmitter and headphone / but i dont know what PCM IS ?anyway i will enjoy i think . thanks for your support

What @americanaudiophile was trying to determine is if you hooked a BT transmitter to a digital audio output, did you change it from surround to stereo. But I read your original post as you tried a USB blutooth adapter, since you used the term "dongle". If that IS what you tried at first, it failed because the TV doesn't know how to interact with it. It knows how to read files from a USB flash drive (maybe for firmware updates only).
Using analog output from the TV, like a headphone jack (which will turn off the speakers) doesn't require any settings changes in the TV menus. Something similar to this is what I was recommending -- https/www.amazon.com/TaoTronics-Bluetooth-Transmitter-Receiver-Simultaneously/dp/B01EHSX28M/ref=pd_lpo_vtph_107_bs_t_1

 

[jain.pwn]

Thanks foryour concern .i m living in india n this brand product is not available .i m trying to buy similar product . Which available in my region. Should i buy any brand of bluetooth headphone for zero latency or, any specific brand ?

 

[kanewolf]

I have no experience with multiple bluetooth adapters. Your best bet would be to try to find reviews.