I am planning on getting the Audio Technica ATH-AD700X's with my new rig and I don't know what I need for an amp. Yes I know I technically can get away without one, I just want really good quality.
I like the Schiit products and was planning on getting the Magni 2 and Modi 2 eventually. Then I stumbled on the "Fulla" dac/amp combo.
http
/schiit.com/products/fulla
I was wondering if this would sufficiently power the 700X's and give me high-ish end sound. I know it's a cheap solution but they seem to make quality stuff on the cheap.
The 700X's specs are:
Frequency Response 5 – 30,000 Hz
Maximum Input Power 700 mW
Sensitivity 100 dB/mW
Impedance 38 ohms
The Fulla specs:
Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-200KHz, -3dB
Maximum Power:
16 ohms: 400mW RMS per channel
32 ohms: 300mW RMS per channel
50 ohms: 220mW RMS per channel
300 ohms: 40mW RMS per channel
THD: <0.004%, 20Hz-20KHz, at 1V RMS
IMD: <0.005%, CCIR
SNR: >101db, A-weighted, referenced to 1V RMS
Crosstalk: >-67dB, 20 Hz-20KHz
Output Impedance: Less than 0.4 ohms
Gain: 1.5 (3.5db)
I like the Schiit products and was planning on getting the Magni 2 and Modi 2 eventually. Then I stumbled on the "Fulla" dac/amp combo.
http

I was wondering if this would sufficiently power the 700X's and give me high-ish end sound. I know it's a cheap solution but they seem to make quality stuff on the cheap.
The 700X's specs are:
Frequency Response 5 – 30,000 Hz
Maximum Input Power 700 mW
Sensitivity 100 dB/mW
Impedance 38 ohms
The Fulla specs:
Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-200KHz, -3dB
Maximum Power:
16 ohms: 400mW RMS per channel
32 ohms: 300mW RMS per channel
50 ohms: 220mW RMS per channel
300 ohms: 40mW RMS per channel
THD: <0.004%, 20Hz-20KHz, at 1V RMS
IMD: <0.005%, CCIR
SNR: >101db, A-weighted, referenced to 1V RMS
Crosstalk: >-67dB, 20 Hz-20KHz
Output Impedance: Less than 0.4 ohms
Gain: 1.5 (3.5db)