TEAC

Hi all! I have a Sony Bravia with a Sony sound bar, a PlayStation 4 and an Apple MacBook Pro all plugged into it via HDMI. The TV can connect to and control the sound bar and PS4 using the device list (change volume, operate the PS4 etc.) However when I plug in a Teac DV-4000 (DVD player) via...

when I connect the optical out of my Toshiba TV to the Optical in of my Teac home theater, I only am able to chose Pro-Logic on the teac, which only gives me Front L and R, center a sub ...no rear surround sound ... is this some type of setting problem?

I cannot get my new TV (which only has USB ports) to communicate with my old TEAC hifi equipment (which only has phono jacks). On the suggestion of the John Lewis tech team I bought a cable with appropriate connections at each end but it does not work. I suppose the hifi equipment is about 12...

Replaced all the heads anyone that can point me in the right direction to getting them all aligned would be greatly appreciated

hi guys. trying to connect my new(ish) LG tv to my old Teac ah500i. i have read through some of the threads on here and came across some advice that helped someine by way of using the head phone socket on the back. i have tried this but sound only comes out of 1 speaker. now my question is. my...

Hello sir I confused after I made two dhibmalaha accounts with one email please how i can recover my theory accounts with one

So I have this TEAC SA-200 amplifier, it works good and I'm guessing it pushes out at least 150w per channel because I have been able to blow 100w rms speakers easily. My issue is that I have in total four subwoofers hooked up to it. Two Cerwin Vega Mobile Hed 150w subs in a sealed box and two...

The TEAC has had various problems over the years but it seems to be the receiver itself, rather than the speakers. While out and about today, I saw a second hand Yamaha for 175 bucks. No speakers. Was wondering if the speakers would work alright. It's hard to compare the specs when I have no...

I literally just found a TEAC SA-200 Integrated Amplifier and a TEAC ST-200 AM/FM Stereo Tuner. Someone threw them out, but they seem to work just fine. So far I hooked up my pair of Zenith SRF711B 2 way speakers (15watts) to it and I can definitely confirm the amp has more power than 15w. I...

I have a VIZIO TV E551VA - purchased in 2012. I have a TEAC Amplifier AG-V2050. I would like to connect the two. Can someone please give me an easy explanation of what I need to do to connect these two? Thank you

iam trying to hook up my teak 80watt modle cd-x10i to my pc the sub has a 9pin plug an a set of rca an my computert has three 3.5 mm plugs in back. two in front headphone an mic. how do i connect the sub to my pc ,do they make an adaptor or do i hard wire a 3.5 mm to it an where do i splice an...

I have an old TEAC AG-780 running all my home speakers and working fine all on from A speaker terminals. I am getting a pool and putting in a Aquasonic MONO speaker. Is there a way to hook this MONO speaker to back B terminal in Mono mode by wiring it correctly.

I need an adapter to hook my vizo tv up to my speakers from my teac mini hi-fi 2-1 speakers. The stereo is broke but I want to hook speakers up. I was told its a 9 pin mini din connection from subwoofer. The adapter needs to be composite/RCA. Anyone know what I'm talking about I'm struggling...

I just purchased a Teac receiver model AG-H380. At the moment it is driving 2 Kohler SoundTile speakers in my shower. I wanted to add an in wall subwoofer out in the dry bathroom area. I bought and installed an OSD IWS-10 and an Audio Source AMP-100 to bridge and power the sub. The Teac receiver...

Hello. I have a small TEAC DV-C200 micro system. It does a number of things I don't care about, I only use it for aux out from my computer (inherited it from my sister) These speakers, for what they are, are amazingly loud. Only 30w total (2*15) and I can hear it over my cranked 2x12 @ 80W...

To anyone that can help. I have been struggling to connect my Cambridge s80 subwoofer to my teac a-r650 amplifier for days now. On the back of the subwoofer, it has a right and left RCA jack line input. No LFE connection is available. On the back of my amplifier, there is speaker connections...

Any great repair recommends in the LA area? Other than Tascam...

Looking for the plug on the back where the remote control plugs in this for a Teac 3340 tape machine

Hello, I have an old Teac V95RX with dbx nr that no longer works and I have several hundred tapes recorded with dbx nr. If I purchased a dbx 222 unit and put tape out and rec in would my tapes sound as they were intended. Without dbx, tapes sound very tinny!

Hello, I have an old Teac V95RX with dbx nr that no longer works and I have several hundred tapes recorded with dbx nr. If I purchased a dbx 222 unit and put tape out and rec in would my tapes sound as they were intended. Without dbx, tapes sound very tinny!

Hello, Please help!!! My Teac AG-D8250 receiver has power but no sound. Will a short circuit have caused the fuses to blow first before any transistors or resistors?

Hello,Where can I buy remote control for above system. Regards Kris

I have a 1975 era Teac 360S Cassette deck. At the time of mfg it was a medium level deck. Now, when the power button is pressed, everything lights up as it should, except the red record light also lights up. The record button is does not appear to have any spring attached as do the other...

I wish to know the best generally accepted TEAC 10" RTR that was produced for consumer in late 70s to 80s. Thank You, David

teac 3340 stored in closet for last 25 years, plays good, counter doesn't work and needs cleaning

Hi, I am looking for a record and play head for a Teac 80-8 tape deck part no 50640811. Thanks. :hello:

My Teac 3340S records only on channel 2 All four channels and VU meters working when mikes plugged in and selectors set to "source"; red record lamps light up on channels 2, 3 and 4. (I have not tried changing the bulb yet) Only channel 2 gives an output when selectors set to "tape" Also...

Hello, I am trying to remove the drive flywheel from my Teac a2300s r2r recorder.I removed the 2 set screws from the flywheel and it still wont come off. It will slide back and forth about 1/2" freely but it still will not come off. I am afraid to force it too much.

What is the difference between these two models: 3340 and 3340-S? And what, in general, would be a reasonable price range for a used, good working order 3340-S? Thanks!

HELLO ..i 'd like to know differences between 3340 AND 3340S THEY LOOK THE SAME THANKS Raphael

I have a TEAC AN-180 Dolby unit. I dug it out (along with my TEAC a-4300 reel) and discovered i have somehow lost my calibration tape!!! Does anyone have one??? I also need a VU meter as the light is burned out (It still works fine) e-mail prostreetpop1@yahoo.com...

Does anyone know the pinout assignments for the remote control connector on the Teac A-5500 reel-to-reel tape deck? Thank you.

Archived from groups: rec.audio.pro (More info?) Hello, Does anyone know the LAST time the A-3440 (not to be confused with the 3340 which is older) was manufactured ? Thanks so much! Daniel

Archived from groups: rec.audio.pro (More info?) FS Teac/Tascam Mixer parts 2, 3, 5, expander, 106, 208, more Model 2, 3, 5, 5 expander M106, M208, 1614 16x4 model most knobs, pots, faders, meters, power supplies, faceplates, sides, etc mm

Archived from groups: rec.audio.pro (More info?) Hi, I have an old Teac A-4300 r2r machine gathering dust. It weighs too much to ship and no one wants it. (still works fine). I though I'd salvage the meters and try and rack them with a handsome hardwood faceplate for an extra reference, for...