How can i run video signal 200 feet

athensconcrete

Honorable
Jun 11, 2012
2
0
10,510
0
Hello,
I have two projectors mounted in the ceiling of our church and need to run video signal to both of them from a single source. The sources for the video will have RCA, HDMI,DVI and USB outputs.
 

revolution2718

Honorable
Apr 8, 2012
74
0
10,610
7
This can get very complicated very quickly, but to make it as simple as possible with the info you gave I'm assuming that you don't need an HD signal.

For a cable run that long ideally you would want to use a BNC cable to send composite video through a Distribution Amplifier (like what I have posted below)

http://www.bhphotovideo.com/c/product/550441-REG/Comprehensive_CDA_V20_CDA_V20_1x2_Composite_Video.%20html

You can get an RCA->BNC adapter, and run from you source (what is the source), to the DA, then to the projectors.

You also might consider hiring a professional.

 

jcoultas98

Distinguished
Feb 19, 2009
505
0
19,010
38
I would agree with Rev, get a professional involved, with that distance, you really need to make sure you don't end up with a huge signal loss. It will be well worth your money, to make sure you don't get all sorts of ugly video issues.
 
Thread starter Similar threads Forum Replies Date
E Streaming Video & TVs 2
A Streaming Video & TVs 1
A Streaming Video & TVs 2
D Streaming Video & TVs 1
B Streaming Video & TVs 1
F Streaming Video & TVs 2
H Streaming Video & TVs 1
C Streaming Video & TVs 1
S Streaming Video & TVs 1
A Streaming Video & TVs 1
C Streaming Video & TVs 1
P Streaming Video & TVs 1
A Streaming Video & TVs 1
G Streaming Video & TVs 3
G Streaming Video & TVs 3
G Streaming Video & TVs 1
G Streaming Video & TVs 5
G Streaming Video & TVs 2
G Streaming Video & TVs 1
G Streaming Video & TVs 4

ASK THE COMMUNITY