Roku TV / HDMI splitter help

Oct 25, 2018
3
0
10
0
Hi all,

I have a cable box for one tv and I am looking to split that via hdmi to a new Roku tcl tv. I have the splitter set up (cable box to splitter ‘in’ and one for each tv on ‘out’, on the right hdmi source and I’m getting an error on the Roku tv that says “HDMI 1 (Arc) No signal - is it connected”. I can’t figure out what I can be doing wrong and all of the cables are connected securely.

Any advice would be appreciated. Thanks
 
Oct 25, 2018
3
0
10
0
Thank you - I’m assuming the below is not a good solution - am I correct? I had this on order just in case.


OREI HD-102 1x2 1 Port HDMI Powered Splitter Ver 1.3 Certified for Full HD 1080P & 3D Support (One Input To Two Outputs)
 
Thread starter Similar threads Forum Replies Date
J Streaming Video & TVs 2
D Streaming Video & TVs 3
B Streaming Video & TVs 1
J Streaming Video & TVs 2
A Streaming Video & TVs 1
D Streaming Video & TVs 7
B Streaming Video & TVs 2
A Streaming Video & TVs 2
J Streaming Video & TVs 2
L Streaming Video & TVs 2
B Streaming Video & TVs 1
C Streaming Video & TVs 1
S Streaming Video & TVs 3
B Streaming Video & TVs 3
R Streaming Video & TVs 1
G Streaming Video & TVs 1
C Streaming Video & TVs 3
Z Streaming Video & TVs 1
F Streaming Video & TVs 1
R Streaming Video & TVs 2

ASK THE COMMUNITY

TRENDING THREADS