Speedfan not automaticly ajusting speed for set temp

[Matthew Verstraete]

I have speed fan 4.49 installed and am trying to use the Automatic Fan Speed. I have set the Desired temp at 32C in the configuration and a min speed of 25 % with a max speed of 100%. Right now the temp is 41C and the Automatic Fan Speed only has the fans running at 48%. I would have thought with an almost +10c difference in current temp vs desired temp the fans would be at 100% by now? I have tried setting the desired temp to 0 and it makes no difference.

Edit: Since I originally posted this the fan speed has been going slowly up will the temp is dropping, it is almost like it is ignoring the chosen temp probe to monitor.

 

[maktovic]

Try setting desired temperatures in BIOS of your motherboard

In my motherboard I have set the Primary Target of my case fans as CPU.
I have set the Temperature at which CPU fan control system ( CPU fan and Case fans ) acquires full speed at 45°C.
If Speedfan doesn't works this method will surely work.

 

[Matthew Verstraete]

I had this working on my system find before I installed a few new SSDs and reinstalled windows and I would like to keep using speedfan so I can have better control over the fan

 

[maktovic]

Check if your BIOS is not the one controlling fan speed. If it is then disable it and then use speedfan

 

[Matthew Verstraete]

The fans are set for Manual control and 0%, it is not the BIOS. Speedfan has no problems controlling it, it is just not tying the temp to the speed of the fan.