After my sandisk SD memory card is formatted in the computer it is not getting detected in the mobilephone, it says no externa

[Sarathar]

after mine sd card was formatted in my computer....the memory card is not working in any device

 

[Titillating]

Did you format it correctly? If your computer still reads it, try formatting it again and making sure that you have selected a file system that is compatible with your device.

 

[sougo]

This means may be the format was not successful
Then you have to format it again
1) Open turn your cpu on, attach the memory card
2) click on start menu right click Computer and select manage
3) Now a separate window will appear, on the top left corner of it click on the Disk Managment under Storage in the list
4) A Disk should be listed side to the Disk 1 in the middle-bottom page Note: a black bar is attached on it ,that is your memory card, you need to again right click on it and click format
5) wait till its complete then right click or click assign
now just wait a lilttle until its finished and your memory card is ready to use again

 

[sougo]

OR the alternative way is to :
Click on start menu, type diskpart in the search box,and click on the diskpart, under program bar that will appear

(NOTE:Just your memory card and keyboard and mouse were to be stay connected untill its done)

Now a screen with black background will appear
you will see a line written DISKPART_
now type- list disk ,then press enter

A list of disk will appear , under Size search for your memory volume(if its 8GB then it will be written like 8192MB),and search for its corresponding name under Disk ###
Type- select disk 1 ,press enter key

NOTE:IF YOUR MEMORY IS listed AS Disk1 then type select disk 1,if listed disk2 then type select disk2 likewise
Type: clean ,press enter key
wait for some time after cleaning is complete you will see the DISKPART_ again

Type: create partition primary ,press enter key
Type: format fs=ntfs ,press enter key
Now wait untill format completes
NOW the final one
Type:assign ,press enter key

wait for a message to show "disk part has succeded in assigning"
now remove your memorycard and have fun

i am not good at explaining hope you can understand what i typed