No picture when running 25' HDMI from AVR to projector.

[a4gash]

No picture when running HDMI from AVR to projector. But when i circumvent the AVR and go direct from Roku to projector, using the same cable, there is no problem. I have tested the AVR using the same source and channels and it works to my flat screen.

 

[americanaudiophile]

HDMI can be very tricky at long runs. The combination of the roku - receiver - 25 ft cable - projector may just be off spec for the projector but not for the flat screen. A different cable or one of these
http/www.monoprice.com/Product?c_id=104&cp_id=10419&cs_id=1041914&p_id=2849&seq=1&format=2
might help.